Profiles→Pier Caps

Lightweight Pier Caps

Lightweight pier caps for gate piers and garden wall piers, made in one piece, square on plan and sized to suit the pier.

Roughcast rendered porch and garden walls with pier caps and copingsPier caps and copings on a roughcast rendered porch

About This Profile Family

Our pier caps are a lightweight alternative designed to replicate traditional stone pier caps. Each cap is made in one piece, square on plan with mitred corners, and sized to suit the pier. Choose a pyramid top, a block top or a stepped top.

See also: garden wall copings to match · pier caps for your own home

Lead Time

2–3 weeks from drawing approval

Supply

Supply or Install

Base Coat

Polymer-Modified

Manufactured

CNC-Cut, Aberdare

Supplied ready-coated with the Taylormade VPI polymer-modified basecoat. Our mouldings are designed to imitate real stone, finished either in a textured stone-effect finish or a smooth painted finish with the look of Portland stone. The finish is confirmed at technical-submittal stage to suit the agreed project finish and adjoining facade interfaces.

Optional Specialist Finishes: Emperor Paint is confirmed compatible with our specified basecoat system and is available as an alternative decorative finish. See our FAQ for details, or contact us to discuss guarantee terms and pricing for your project.

Key Dimensions

Key dimensions of the pier caps shown on this page
CodeProfileOverall size on planSuits a pier ofHeightTopApprox. weight per cap
PR101-361Block-top pier cap512 mm × 512 mm361 mm × 361 mm165 mmFlat3.0 kg
PR101-457Block-top pier cap584 mm × 584 mm457 mm × 457 mm171 mmFlat3.8 kg
PR101-521Block-top pier cap610 mm × 610 mm521 mm × 521 mm210 mmFlat4.9 kg
PR101-555Block-top pier cap737 mm × 737 mm555 mm × 555 mm190 mmFlat6.4 kg
PR101-686Block-top pier cap826 mm × 826 mm686 mm × 686 mm184 mmFlat7.2 kg
PR101-800Block-top pier cap915 mm × 915 mm800 mm × 800 mm213 mmFlat9.1 kg
PR102-555Block-top pier cap, ovolo737 mm × 737 mm555 mm × 555 mm178 mmFlat6.4 kg
PR102-610Block-top pier cap, ovolo730 mm × 730 mm610 mm × 610 mm169 mmFlat5.7 kg
PR103-219Pyramid pier cap346 mm × 346 mm219 mm × 219 mm175 mmPyramid1.6 kg
PR103-330Pyramid pier cap457 mm × 457 mm330 mm × 330 mm175 mmPyramid2.5 kg
PR103-457Pyramid pier cap584 mm × 584 mm457 mm × 457 mm175 mmPyramid3.8 kg
PR103-560Pyramid pier cap687 mm × 687 mm560 mm × 560 mm175 mmPyramid5.1 kg
PR103-672Pyramid pier cap799 mm × 799 mm672 mm × 672 mm175 mmPyramid6.6 kg
PR103-902Pyramid pier cap1029 mm × 1029 mm902 mm × 902 mm175 mmPyramid10.5 kg
PR104-381Necked pyramid pier cap641 mm × 641 mm381 mm × 381 mm391 mmPyramid7.0 kg
PR104-500Necked pyramid pier cap762 mm × 762 mm500 mm × 500 mm411 mmPyramid9.8 kg
PR106-395Stepped pier cap565 mm × 565 mm395 mm × 395 mm202 mmFlat3.7 kg
PR106-597Stepped pier cap813 mm × 813 mm597 mm × 597 mm292 mmFlat8.7 kg
PR106-711Stepped pier cap1067 mm × 1067 mm711 mm × 711 mm407 mmFlat16.5 kg

Supplied basecoated, ready for a decorative finish by others, or fully finished.

Weights are approximate and based on a nominal 4 mm basecoat. Actual weight varies slightly with coating thickness and manufacturing tolerance. Please allow for this in handling and transport calculations.

Pier cap profiles (19)

Extended Range

Further profiles, adaptable to your sizes.

View the Extended Range

Sizing & Installation Guidance

Installation Guidance

  • ·Confirm the finished pier size on site before ordering, so the cap sits centrally with an even overhang.
  • ·Profiles are fixed with our dual-bond method: VPI RHÉAMIX MONO adhesive mortar over two-thirds of the bedding face gives the permanent bond, and Insta-Stik polyurethane adhesive over the centre third grips the profile while the mortar cures. Mechanical fixing is rarely needed; where the size or complexity of a profile calls for it, this is reviewed at design stage.

This detail is for general guidance only and is not project specific. Always refer to the project architect details and, where applicable, the project specification. For technical queries, contact us on 01685 875410 or info@taylormadefacades.com.

Common Questions

What pier sizes do your pier caps suit?

Our standard caps suit piers from 219mm to 902mm square. Each cap can also be made to suit your own pier size.

Are the pier caps made in one piece?

Yes. Each cap is cut in one piece, square on plan with mitred corners, so there are no joints on the top.

How long do pier caps take to make?

Typically 2–3 weeks from drawing approval.

Call 01685 875410Get a Quote