Lightweight Garden Wall Coping Stones
Coping stones for freestanding garden and boundary walls, with drip edges either side.
About This Profile Family
Our garden wall copings are a lightweight alternative designed to replicate traditional stone copings. Featured coping profiles for freestanding garden and boundary walls are shown below, with weathered, segmental, bullnose or half-round tops and drip edges either side to shed water clear of the wall face. Made to the lengths your elevation requires, up to 2400mm per piece. 800mm and 1200mm are the most commonly specified; other sizes are made to order. On supply-and-install packages, lengths are set out to suit the layout. All profile ends are base-coated.
See also: lightweight coping stones · parapet coping and cappings
Lead Time
2–3 weeks from drawing approval
Supply
Supply or Install
Base Coat
Polymer-Modified
Manufactured
CNC-Cut, Aberdare
Supplied ready-coated with the Taylormade VPI polymer-modified basecoat. Our mouldings are designed to imitate real stone, finished either in a textured stone-effect finish or a smooth painted finish with the look of Portland stone. The finish is confirmed at technical-submittal stage to suit the agreed project finish and adjoining facade interfaces.
Optional Specialist Finishes: Emperor Paint is confirmed compatible with our specified basecoat system and is available as an alternative decorative finish. See our FAQ for details, or contact us to discuss guarantee terms and pricing for your project.
Garden wall coping profiles (12)
Sizing & Installation Guidance
Available Sizes
Finished Taylormade profiles are manufactured to -2mm / +2mm from the approved nominal dimensions unless otherwise agreed in writing.
Need a different size? This profile may be adapted to a bespoke size where technically feasible — contact us with your required dimensions and we'll confirm feasibility and pricing.
Installation Guidance
- ·Adjoining wall finish as per project specification (by others, or by our team where agreed).
- ·Profiles are normally fixed with a 3-strip adhesive bed and Insta-Stik secondary fixing. Mechanical fixing is rarely needed; where the size or complexity of a profile calls for it, this is reviewed at design stage.
This detail is for general guidance only and is not project specific. Always refer to the project architect details and, where applicable, the project specification. For technical queries, contact us on 01685 875410 or info@taylormadefacades.com.
Related Profile Families
Parapet Cappings
Lightweight parapet mouldings and parapet cappings for parapets and wall heads, engineered with a projecting drip edge either side.
Cornices
Lightweight architectural cornice mouldings for eaves, floor divisions and parapet detailing, CNC-cut in Aberdare, South Wales.
Quoin Stones
Quoin stones (quoins) for corner detailing on classical and Georgian facades, with plain, chamfered, bevelled or rounded edges and long faces of 337.5, 450 or 562.5mm.